Skip to main content

Basics: Data Types

>> Value Set
>> Nets
>> Registers
>> Integers
>> Real Numbers
>> Parameters
>> Vectors
>> Arrays
>> Strings
>> Time Data Type


Value Set

The Verilog HDL value set consists of four basic values:
  • 0 - represents a logic zero, or a false condition.
  • 1 - represents a logic one, or a true condition.
  • x - represents an unknown logic value.
  • z - represents a high-impedance state.
The values 0 and 1 are logical complements of one another. Almost all of the data types in the Verilog HDL store all four basic values.

Nets

Nets are used to make connections between hardware elements. Nets simply reflect the value at one end(head) to the other end(tail). It means the value they carry is continuously driven by the output of a hardware element to which they are connected to. Nets are generally declared using the keyword wire. The default value of net (wire) is z. If a net has no driver, then its value is z.

Registers

Registers are data storage elements. They hold the value until they are replaced by some other value. Register doesn't need a driver, they can be changed at anytime in a simulation. Registers are generally declared with the keyword reg. Its default value is x. Register data types should not be confused with hardware registers, these are simply variables.

Integers

Integer is a register data type of 32 bits. The only difference of declaring it as integer is that, it becomes a signed value. When you declare it as a 32 bit register (array) it is an unsigned value. It is declared using the keyword integer.

Real Numbers

Real number can be declared using the keyword real. They can be assigned values as follows:
real r_1;

r_1 = 1.234; // Decimal notation.
r_1 = 3e4; // Scientific notation.

Parameters

Parameters are the constants that can be declared using the keyword parameter. Parameters are in general used for customization of a design. Parameters are declared as follows:

parameter p_1 = 123; // p_1 is a constant with value 123.

Keyword defparam can be used to change a parameter value at module instantiation. Keyword localparam is usedd to declare local parameters, this is used when their value should not be changed.

Vectors

Vectors can be a net or reg data types. They are declared as [high:low] or [low:high], but the left number is always the MSB of the vector.

wire [7:0] v_1; // v_1[7] is the MSB.
reg [0:15] v_2; // v_2[15] is the MSB.

In the above examples: If it is written as v_1[5:2], it is the part of the entire vector which contains 4 bits in order: v_1[5], v_1[4], v_1[3], v_1[2]. Similarly v_2[0:7], means the first half part of the vecotr v_2.
Vector parts can also be specified in a different way:
vector_name[start_bit+:width] : part-select increments from start_bit. In above example: v_2[0:7] is same as v_2[0+:8]. vector_name[start_bit-:width] : part-select decrements from start_bit. In above example: v_1[5:2] is same as v_1[5-:4].

Arrays

Arrays of reg, integer, real, time, and vectors are allowed. Arrays are declared as follows:

reg a_1[0:7];
real a_3[15:0];
wire [0:3] a_4[7:0]; // Array of vector
integer a_5[0:3][6:0]; // Double dimensional array

Strings

Strings are register data types. For storing a character, we need a 8-bit register data type. So if you want to create string variable of length n. The string should be declared as register data type of length n*8.

reg [8*8-1:0] string_1; // string_1 is a string of length 8.

Time Data Type

Time data type is declared using the keyword time. These are generally used to store simulation time. In general it is 64-bit long.

time t_1;
t_1 = $time; // assigns current simulation time to t_1.

There are some other data types, but are considered to be advanced data types, hence they are not discussed here.


<< Previous Home  Next >>   

 
Labels:

Comments

Post a Comment

Popular posts from this blog

Digital Design Interview Questions - All in 1

1. How do you convert a XOR gate into a buffer and a inverter (Use only one XOR gate for each)? Answer 2. Implement an 2-input AND gate using a 2x1 mux. Answer 3. What is a multiplexer? Answer A multiplexer is a combinational circuit which selects one of many input signals and directs to the only output. 4. What is a ring counter? Answer A ring counter is a type of counter composed of a circular shift register. The output of the last shift register is fed to the input of the first register. For example, in a 4-register counter, with initial register values of 1100, the repeating pattern is: 1100, 0110, 0011, 1001, 1100, so on. 5. Compare and Contrast Synchronous and Asynchronous reset. Answer Synchronous reset logic will synthesize to smaller flip-flops, particularly if the reset is gated with the logic generating the d-input. But in such a case, the combinational logic gate count grows, so the overall gate count savings may not be that significant. The clock works as a filter for sma
224 comments
Read more

XMR: Cross Module Reference

Cross Module Reference   Cross Module Reference abbreviated as XMR is a very useful concept in Verilog HDL (as well as system Verilog). However it seems to be less known among many users of Verilog. XMR is a mechanism built into Verilog to globally reference (i.e., across the modules) to any nets, tasks, functions etc. Using XMR, one can refer to any object of a module in any other module, irrespective of whether they are present below or above its hierarchy. Hence, a XMR can be a:   Downward reference OR Upward reference   Consider the following hierarchy:     Module A   Net x   Instance P of Module B     Net x   Instance M of Module D   Net x   Instance Q of Module C   Net x   Instance N of Module E    Net x   Instance R of Module B   Net x   Instance M of Module D   Net x     In test bench:   Instance top of Module A   In the above scenario, there is a
3 comments
Read more

Synchronous Reset vs. Asynchronous Reset

Why Reset? A Reset is required to initialize a hardware design for system operation and to force an ASIC into a known state for simulation. A reset simply changes the state of the device/design/ASIC to a user/designer defined state. There are two types of reset, what are they? As you can guess them, they are Synchronous reset and Asynchronous reset. Synchronous Reset A synchronous reset signal will only affect or reset the state of the flip-flop on the active edge of the clock. The reset signal is applied as is any other input to the state machine. Advantages: The advantage to this type of topology is that the reset presented to all functional flip-flops is fully synchronous to the clock and will always meet the reset recovery time. Synchronous reset logic will synthesize to smaller flip-flops, particularly if the reset is gated with the logic generating the d-input. But in such a case, the combinational logic gate count grows, so the overall gate count savings may not be
46 comments
Read more