Skip to main content

Basics: Number Specification

Sized Number Specification

Representation: [size]'[base][number]
  • [size] is written only in decimal and specifies the number of bits.
  • [base] could be 'd' or 'D' for decimal, 'h' or 'H' for hexadecimal, 'b' or 'B' for binary, and 'o' or 'O' for octal.
  • [number] The number is specified as consecutive digits. Uppercase letters are legal for number specification (in case of hexadecimal numbers).
Ex: 4'b1111 : 4-bit binary number
16'h1A2F : 16-bit hexadecimal number
32'd1 : 32-bit decimal number
8'o3 : 8-bit octal number

Unsized Number Specification

By default numbers that are specified without a [base] specification are decimal numbers. Numbers that are written without a [size] specification have a default number of bits that is simulator and/or machine specific (generally 32).

Ex: 123 : This is a decimal number
'hc3 : This is a hexadecimal number
Number of bits depends on simulator/machine, generally 32.

x or z values

x - Unknown value.
z - High impedance value
An x or z sets four bits for a number in the hexadecimal base, three bits for a number in the octal base, and one bit for a number in the binary base.

Note: If the most significant bit of a number is 0, x, or z, the number is automatically extended to fill the most significant bits, respectively, with 0, x, or z. This makes it easy to assign x or z to whole vector. If the most significant digit is 1, then it is also zero extended.

Negative Numbers

Representation: -[size]'[base][number]

Ex: -8'd9 : 8-bit negative number stored as 2's complement of 8
-8'sd3 : Used for performing signed integer math
4'd-2 : Illegal

Underscore(_) and question(?) mark

An underscore, "_" is allowed to use anywhere in a number except in the beginning. It is used only to improve readability of numbers and are ignored by Verilog. A question mark "?" is the alternative for z w.r.t. numbers
Ex: 8'b1100_1101 : Underscore improves readability
4'b1??1 : same as 4'b1zz1
Labels:

Comments

Post a Comment

Popular posts from this blog

Digital Design Interview Questions - All in 1

1. How do you convert a XOR gate into a buffer and a inverter (Use only one XOR gate for each)? Answer 2. Implement an 2-input AND gate using a 2x1 mux. Answer 3. What is a multiplexer? Answer A multiplexer is a combinational circuit which selects one of many input signals and directs to the only output. 4. What is a ring counter? Answer A ring counter is a type of counter composed of a circular shift register. The output of the last shift register is fed to the input of the first register. For example, in a 4-register counter, with initial register values of 1100, the repeating pattern is: 1100, 0110, 0011, 1001, 1100, so on. 5. Compare and Contrast Synchronous and Asynchronous reset. Answer Synchronous reset logic will synthesize to smaller flip-flops, particularly if the reset is gated with the logic generating the d-input. But in such a case, the combinational logic gate count grows, so the overall gate count savings may not be that significant. The clock works as a filter for sma
224 comments
Read more

XMR: Cross Module Reference

Cross Module Reference   Cross Module Reference abbreviated as XMR is a very useful concept in Verilog HDL (as well as system Verilog). However it seems to be less known among many users of Verilog. XMR is a mechanism built into Verilog to globally reference (i.e., across the modules) to any nets, tasks, functions etc. Using XMR, one can refer to any object of a module in any other module, irrespective of whether they are present below or above its hierarchy. Hence, a XMR can be a:   Downward reference OR Upward reference   Consider the following hierarchy:     Module A   Net x   Instance P of Module B     Net x   Instance M of Module D   Net x   Instance Q of Module C   Net x   Instance N of Module E    Net x   Instance R of Module B   Net x   Instance M of Module D   Net x     In test bench:   Instance top of Module A   In the above scenario, there is a
3 comments
Read more

Synchronous Reset vs. Asynchronous Reset

Why Reset? A Reset is required to initialize a hardware design for system operation and to force an ASIC into a known state for simulation. A reset simply changes the state of the device/design/ASIC to a user/designer defined state. There are two types of reset, what are they? As you can guess them, they are Synchronous reset and Asynchronous reset. Synchronous Reset A synchronous reset signal will only affect or reset the state of the flip-flop on the active edge of the clock. The reset signal is applied as is any other input to the state machine. Advantages: The advantage to this type of topology is that the reset presented to all functional flip-flops is fully synchronous to the clock and will always meet the reset recovery time. Synchronous reset logic will synthesize to smaller flip-flops, particularly if the reset is gated with the logic generating the d-input. But in such a case, the combinational logic gate count grows, so the overall gate count savings may not be
46 comments
Read more